Hydraulic caliper brakesOil-appliedCOREMO oil-applied caliper brakes use the lever principle to generate the clamping force, which is applied to the brake disc in proportion to the oil pressure.The certified, tested and inspected SG iron levers are designed to withstand the stres..

Direct hydraulic brakesCOREMO oil-applied direct hydraulic brakes provide a clamping force proportional to the pressure of the oil acting within the chamber in the brake body. Brake bodies - in cast iron or steel - are designed to withstand high pressures and prevent oil leaks. T..

A3-IDBraking force F :A3-ID 15987 N at 100 barMax pressure :100 barMax total wear :16 mmThickness of new lining :16 mmContinuous thermal capacity Qc :1.7 kWContinuous thermal capacity for double pad version Qc :2.7 kWHydraulic fluid :Mineral oil based SAE/ISO 46Total oil displace..

D2N-IDBraking force F :D2N-ID 5600 NDynamic torque := F • (disc radius in m - 0.033) = NmMax total wear :12 mmThickness of new lining :11 mmContinuous thermal capacity Qc :3.4kWMinimum release pressure :25 bar D2N-IDMax pressure :100 barThe torque values specified are obtained w..

Air-AppliedAir-actuated pneumatic caliper brakesare intended for all industrial sectors which require pneumatic operation of the system.This type of brake is normally chosen for service stops or tensioning braking. Forces vary depending on the pressure of the air supplied; the ma..

FailsafeFailsafe pneumatic caliper brakesare used in all industrial sectors where pneumatic operation is possible and are normally chosen for emergency and/or parking brake functions. The clamping force of each model is generated by helical springs which allow low reaction times...

Combined DUALThe Coremo A DUAL pneumatic caliper brake is able to function as both an air-actuated and a failsafe brake. It comprises a single thruster and is designed for industrial applications in which the clamping forces are applied by the air (air-actuated) or the springs (f..

Electric Caliper BrakesCoremo failsafe electric brakes are designed for industrial applications where pneumatic or hydraulic power is not available.These brakes cover a clamping force range of 2500 to 5700 [N] and are able to provide cyclic stops varying from 30 cycles/hour, for ..

Coremo hydraulic power packs are designed to complete the braking system of all industrial applications where a hydraulic brake is used. To operate all types of hydraulic brake - oil-applied, spring-applied, caliper and direct - two different families have been designed:..

IntroductionMechanically-applied caliper brakes are intended for all those industrial applications in which the pneumatic or hydraulic power may be absent, making mechanical operation of the brake necessary. This type of brake is normally chosen for static, service or tensio..